CNC Servo Motor Driver
- Home
- Servo Driver
- MZ650P Series CNC Servo Motor Driver
MZ650P Series CNC Servo Motor Driver
CNC servo motor drivers have robust feedback systems that provide real-time data on motor performance. This feedback helps in making necessary adjustments to maintain optimal operation.This CNC servo motor drivers are designed to be energy efficient, reducing power consumption while maintaining high performance.
The CNC Servo Motor Driver are compatible with a wide range of CNC machines and can be integrated into various systems.
MZ650P Series CNC Servo Motor Driver Feature
|
Type
|
Series |
Characteristic
|
|
Servo Motor Drives
|
MZ650P
|
Quickly
|
| 3.0kHZ Corresponding bandwidth of speed loop | ||
|
Convenient
|
||
|
Wiring is simple and convenient Eliminate limit and origin One-touch adjustment Easy to replace encoder battery |
||
|
Precise
|
||
|
The encoder resolution reaches 17/23bit
|
||
|
Strong adaptability to the environment
|
||
|
Meet safety standards The CNC Servo Motor Driver reaches a higher waterproof level Safe and reliable to use，Wiring is simple and convenient |
MZ650P Series CNC Servo Motor Driver Specifications
| Item | Specifications | |||||||||||||||
| Model |
MZ650PS □□□ I
|
MZ650PT □□□ I
|
||||||||||||||
|
025
|
032
|
045
|
060
|
075
|
3R5
|
5R4
|
8R4
|
012
|
017
|
021
|
026
|
032
|
||||
| outlook | A(mm) |
88
|
130
|
190
|
49
|
70
|
88
|
|||||||||
| B(mm) |
248
|
352
|
447
|
162
|
193
|
248
|
||||||||||
| W(mm) | 245 |
215
|
215
|
177
|
204
|
215
|
||||||||||
| H(mm) |
258
|
368
|
463
|
174
|
203
|
258
|
||||||||||
| D(mm) | 110 |
206
|
224
|
60
|
92
|
110
|
||||||||||
| R(mm) | 2.8 |
3.5
|
3.5
|
2.5
|
2.8
|
2.8
|
||||||||||
| Weight(kg) | 5.1 |
8.3
|
12
|
1.3
|
2.7
|
5.1
|
||||||||||
| Input Power | Three phase AC200V-240V,-15% ～ 10%，50/60Hz |
Three phase AC380V-440V，-15% ～ 10%，50/60Hz
|
||||||||||||||
| Model Type MZ650PT □□□ I |
037
|
045
|
060
|
075
|
090
|
112
|
037
|
045
|
060 075 | |||||||
| outlook | A(mm) |
130
|
190
|
272
|
200
|
|||||||||||
| B(mm) |
352
|
447
|
465
|
614
|
||||||||||||
| W(mm) |
215
|
215
|
249
|
309
|
||||||||||||
| H(mm) |
368
|
463
|
480
|
630
|
||||||||||||
| D(mm) |
206
|
224
|
304
|
278 | ||||||||||||
| R(mm) |
3.5
|
3.5
|
9
|
9 | ||||||||||||
| Weight(kg) |
8.3
|
12
|
22.9
|
39
|
||||||||||||
| Input Power |
Three phase AC380V-440V，-15% ～ 10%，50/60Hz
|
|||||||||||||||
| Basic information | Environment | Temp ℃ | Use environment temperature | 0~+55℃ (decrease if the ambient temperature is between 40℃ and 50℃ ) | ||||||||||||
| Storage environment temperature | -20 ～ 65℃ | |||||||||||||||
| Humidity | Use environment | 20~85% RH below(No condensation) | ||||||||||||||
| Storage environment humidity | 20~85% RH below(No condensation) | |||||||||||||||
| Use and preserve ambient air | indoor(no sunshine)、No corrosive gas, flammable gas, oil mist, dust | |||||||||||||||
| altitude | Below 1000m | |||||||||||||||
| vibration | 5.8m/s2(0.6G)below 10~60Hz(Can not be used continuously at resonance frequency) | |||||||||||||||
| Insulation withstand voltage | Basic-FG between AC1500V 1min | |||||||||||||||
| Control way | Three-phase PWM converter sine wave drive | |||||||||||||||
| Encoder feedback |
1： 23bit (after adding a battery, it can be used as a multi-turn absolute encoder) 2：rotary encoder |
|||||||||||||||
| Control signal | Input |
8 inputs (DC24V optocoupler isolation) switch according to the control mode function
|
||||||||||||||
| Output |
5 output (DC24V optocoupler isolation, open collector output) switch according to the control mode function
|
|||||||||||||||
| Pulse signal | Input |
2 inputs (optocoupler isolation, RS-422 differential, open collector output)
|
||||||||||||||
| Output |
4 outputs (A/B/Z phase RS-422 differential; Z phase open collector output)
|
|||||||||||||||
| Comm function | RS232 | For PC communication (for "Servostudio" connection) | ||||||||||||||
| RS-485 | For upper remote control communication (1:n) | |||||||||||||||
| CAN | CANOPEN bus communication | |||||||||||||||
| Regeneration function | Optional regenerative resistor, external regenerative resistor. Pay attention to modify internal parameters | |||||||||||||||
| Control model | 6 control modes: speed control, position control, torque control, torque/speed control, speed/position control, torque/position, torque/speed/position hybrid control | |||||||||||||||
| Item | Specifications | |||
| Function | Control input | Alarm reset, proportional action switching, zero fixed function enable, forward drive prohibited, reverse drive prohibited, external torque limit for forward rotation, external torque limit for reverse rotation,forward jog, reverse jog, forward Reset switch, reverse reset switch, origin switch, emergency stop, servo enable, gain switch | ||
| Control output | Servo ready, motor rotating, zero speed signal, speed reached, position reached, positioning approach signal, torque limit, speed limit, brake output, warning, servo failure, alarm code (3-digit output) | |||
| Position | Pulse input | Maximum command pulse frequency |
Diferential input: high-speed maximum 4Mpps, pulse width cannot be less than 0.125μs The maximum low speed is 500Kpps, and the pulse width cannot be less than 1μs Open collector: maximum 200Kpps, pulse width cannot be less than 2.5μs |
|
| Input pulse signal form | Differential input; open collector | |||
| Input pulse signal method |
Pulse + direction, right angle phase difference (A phase + B phase), CW + CCW pulse
|
|||
| Command pulse multiplication division/ (Electronic gearratio setting) | 0.1048576 < B/A <419430.4 | |||
| Command filter | Smoothing filter, FIR filter | |||
|
Pulse output
|
Output pulse form
|
Phase A, Phase B: Differential output Z phase: differential output or open collector output |
||
| Frequency division ratio |
Arbitrary frequency division
|
|||
| Output pulse function |
Encoder position pulse and position pulse command (can be set)
|
|||
| Speed control | Control input | Servo ON, alarm reset, speed command reverse, zero speed clamp, internal command selection input 1, internal command selection input 2, internal command selection input 3, internal command selection input 4, forward rotation external torque limit input, reverse rotation External torque limit input, emergency stop | ||
| Control output | Alarm status, servo preparation, brake release, torque limit output, speed limit output speed reached,speed consistent, motor rotation output, zero-speed signal output | |||
| Torque Control | Control input | Servo ON, alarm reset, torque command reverse, zero speed clamp | ||
| Control output | Alarm status, servo preparation, brake release, torque limit, speed limit output, emergency stop | |||
| Torque command input | (Factory default setting, the range can be set by function code) | |||
| Speed limit function | Positive and negative internal speed limit P03.27, P03.28 | |||
| Common | Speed observer function | YES | ||
| Damping control function | YES | |||
| Adaptive notch filter | YES | |||
| Automatic adjustment function | YES | |||
| Encoder output frequency division | YES | |||
| Internal location planning function | YES | |||
| Adjustment/ function setting | Use the host computer setting software "Servo studio" to adjust | |||
| Protection | Over voltage, abnormal power supply, over current, overload, abnormal encoder, over speed, excessive position deviation, abnormal parameters, etc. | |||
Servo System Wiring connection
Circuit breaker for wiring
Used to protect the power line and cut of the circuit if over current.
Noise flter
Install a noise flter to prevent external noise.
Electromagnetic contactor
Turns on/of servo power . Please install a surge suppressor.
Electromagnetic contactor
Use external resistor,remove the B2 and B3 tabs, connect the braking resistor between B1+ and B2;use an internal braking,short circuit B2 and B3.
Brake power
24V dc voltage source, used as the motor has a hol brake.
Electromagnetic contactor
Brake control signal, turn on/of brake power.Install a surge suppressor.
Please pay attention to the power supply capacity when connecting external control power supply or 24Vdc power supply, especially when supplying power to several drives or multiple brakes at the same time, insufficient power supply capacity will lead to insufficient supply current and failure of the driver or the brake. The braking power supply is a 24V DC voltage source. The power should refer to the motor model and meet the braking power requirements.
System wiring precautions:
1. When connecting an external braking resistor, please remove the short-circuit wire between terminals B2 and B3 of the servo driver before connecting. Pay attention to modify the internal parameters.
2. CN3 and CN4 define exactly the same communication interface for the two pins, which can be used arbitrarily between the two.
3. In single-phase 220V wiring, the main circuit terminals are L1 and L2, and the reserved terminals should not be connected.
Used to protect the power line and cut of the circuit if over current.
Noise flter
Install a noise flter to prevent external noise.
Electromagnetic contactor
Turns on/of servo power . Please install a surge suppressor.
Electromagnetic contactor
Use external resistor,remove the B2 and B3 tabs, connect the braking resistor between B1+ and B2;use an internal braking,short circuit B2 and B3.
Brake power
24V dc voltage source, used as the motor has a hol brake.
Electromagnetic contactor
Brake control signal, turn on/of brake power.Install a surge suppressor.
Please pay attention to the power supply capacity when connecting external control power supply or 24Vdc power supply, especially when supplying power to several drives or multiple brakes at the same time, insufficient power supply capacity will lead to insufficient supply current and failure of the driver or the brake. The braking power supply is a 24V DC voltage source. The power should refer to the motor model and meet the braking power requirements.
System wiring precautions:
1. When connecting an external braking resistor, please remove the short-circuit wire between terminals B2 and B3 of the servo driver before connecting. Pay attention to modify the internal parameters.
2. CN3 and CN4 define exactly the same communication interface for the two pins, which can be used arbitrarily between the two.
3. In single-phase 220V wiring, the main circuit terminals are L1 and L2, and the reserved terminals should not be connected.
MZ650P Series CNC Servo Motor Driver installation dimensions
Have project in mind?
Get in touch with us to see how we can help you with your project.